Midline (concentric) The structural characteristics of the midline

Centerline (concentric) The structural feature of the centerline is that the shaft center of the valve stem, the center of the gate, and the center of the body are in the same position. The structure is simple and the manufacturing is convenient. Common rubber linings belong to this category.

The disadvantage is that the gate and the valve seat are always in a state of squeezing and scratching, large resistance distance, and fast wear. In order to overcome squeezing, scratching, and to ensure the sealing performance, the valve seat is basically made of elastic materials such as rubber, but the sealing material is also limited by temperature in use, which is why people traditionally think that it is not resistant to high temperatures.

Applicable to the pipelines of petroleum, chemical, food, medicine, paper, water and electricity, ships, water supply, drainage, smelting and energy, etc., and can be used in a variety of corrosive and non-corrosive gas, liquid, semi-fluid and solid powder pipelines and containers The above is used for regulating and intercepting equipment.

The Difference Between Centerline Butterfly And Eccentric Butterfly Valve

02

Double eccentricity is further improved on the basis of single eccentricity, and it is also the most widely used. Its structural feature is that the axis of the valve stem deviates from the center of the gate and the center of the body. The double eccentric effect enables the gate to be released from the valve seat immediately after the valve is opened, which greatly eliminates unnecessary excessive squeezing and scratching of the gate and the valve seat, reduces the opening resistance, reduces wear and improves The life of the valve seat is improved. The scrape is greatly reduced, and at the same time, the double eccentric can also use metal seat, which improves the application in the high temperature field (but the sealing performance is not good). Therefore, in the case of high temperature, we recommend the use of double eccentric hard seal. Double eccentric fireproof type.

The rotation center of the butterfly plate and the sealing position of the valve seat form two eccentric distances, which ensure that the butterfly plate is quickly separated from the valve seat during the switch rotation process, so that there is no contact between the butterfly valve and the seal during the working process, which reduces Wear and tear, and more importantly, our G-type valve seat applies the patented technology of Handa (HD). Through a large number of calculations, trial and error, and actual measurement in domestic applications, it has proved that the high-performance butterfly valve has "zero leakage and 100% leakage". The effect of “ten thousand times service life”, our G-type sealing valve seat, from the cross-sectional view, we can see that the contact shape between the butterfly plate of our butterfly valve and the sealing surface of the valve seat is like a simply supported beam structure, when the butterfly plate squeezes towards When the sealing surface of the valve seat, the sealing surface has a flexible deformation position and space, so when the medium pressure changes and the valve seat moves axially, the PTFE valve seat will not be deformed by cold flow. In this way, the butterfly valve will open and close. The sealing surface of the seat will not be squeezed and deformed, and the service life of the valve seat is particularly long.

Comments

Post a Comment

Popular posts from this blog

Types of Metal Seat Gate Valves

Image
According to the sealing surface configuration, it can be divided into wedge gate valve and parallel gate valve. Wedge gate valve can be divided into: single gate, double gate and elastic gate; parallel gate valve can be divided into single gate Plate type and double gate type. Divided according to the thread position of the valve stem, it can be divided into two types: open stem gate valve and dark stem gate valve. 【 Resilient Seat Gate Valve 】 For industrial valves, the opening and closing parts of soft-sealed gate valves are gates. The movement direction of the gates is perpendicular to the direction of the fluid. The gate valves can only be fully opened and fully closed, and cannot be adjusted or throttled. [Principle of Resilient Seat] The resilient seat l gate valve is divided into two types: bright-stem resilient seat gate valve and dark-stem resilient seat gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the gui
Read more

What is a knife gate valve?

Image
Knife gate valves are designed primarily for on/off and isolation service in systems with high suspended solids content. Knife gate valves are particularly suitable for handling slurry, viscous, corrosive and abrasive media. These valves have minimal pressure drop in the fully open position, they are easy to start, they have a relatively low weight and are cost effective.   When are knife gate valves used? Knife gate valves are commonly used in mining , power plants and in the paper, chemical and food industries. Knife gate valves have the advantage of being very compact due to the linear movement of the closing flap (the plate that stops the flow of fluid in the closed position). The knife gate valve is primarily a globe valve, although it can also be used as a control valve when the flapper valve is in the partially open position. Knife gate valves can be used for fluids containing solid particles, such as waste water or sludge. Generally, knife gate valves are designed to seal on th
Read more