Tianjin KXC Metal Products Co., Ltd.

  Wafer Butterfly Valve KXC   Butterfly Valves  are used for isolating and regulating flow. The closing mechanism is a disc that allows for quick shut off, much like a ball valve. Butterfly valves are light in weight so they require less support. Unlike the ball valve, the disc is always present within the flow, therefore a pressure drop is always induced during flow, regardless of valve position. The disc is typically rotated a quarter turn when the valve is fully opened, but the valve may also be opened incrementally in order to throttle flow. Wafer Type Butterfly Valve Wafer type ball valves fit between two flanges, with studs passing from one flange through other. The valve is held in place and sealed with gasket by the tension of suds. These are considered low cost butter fly valves . More information about Tianjin KXC group , please click here

  Ductile Iron Metal Seat Gate Valve Our range of KXC   metal seat gate valves  are cast in foot design for stability and safe and easy storage with fixed lifting devices for simple installation. Metal Seat Gate Valve   Specifications : Size: DN80-DN800 Pressure: PN10/PN16 Standard:  EN593, DIN 2501 PN6/10/16, DIN3202 F4 Materials: Body : Cast Iron Seal : Cast Iron+brass Stem : Stainless Steel 304 KXC cast steel gate valves  are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of API-600 and ANSI B 16.34. more detail pls click here .

  Cast Steel Gate Valve Cast Steel Gate Valve   Specifications : Size: DN40-DN600 Pressure: PN10/PN16 Standard:  EN593, DIN 2501 PN6/10/16, DIN3202 F4 Materials: Body : WCB Met a l Seat Gate Valve Seal : WCB+2Cr13stainless steel Stem : 2Cr13stainless steel KXC   gate valve  that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar. The gate faces can form a wedge shape or they can be parallel. Typical gate valves  should never be used for regulating flow, unless they are specifically designed for that purpose. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening. More detail please click here

  Cast Iron Pressure Groove End Gate Valve Resilient seat gate valves for water supply  pipelines KXC   Resilient seat gate valves  are suitable for pipelines transporting drinking, raw or waste water with a temperature no higher than 60°C. The gate valves and the components that come into contact with drinking water comply with standard EN 1074-2 and the drinking water regulations of many countries respectively. Composed of strong and durable ductile iron, resilient seat gate valves operate in two different ways: Resilient seat gate valve   Specifications : Size: DN50-DN800 Pressure: PN1.0-1.6MPa Standard:  BS5163, BS4504 PN10.PN16/EN 1092 More about Tianjin KXC Gate Valve , please click here

  Resilient Seat Gate Valve KXC   Resilient seat gate valves  are gate valves with an elastomer lined wedge. They are especially used for waste water, drinking water supply and irrigation. Gate Valve   Specifications : Size: DN40-DN400 Pressure: PN10/PN16 Standard:  EN593, DIN 2501 PN6/10/16, DIN3202 F4 Materials: Body :Ductile Iron Seal : Ductile Iron+EPDM(Soft Seated) Stem : Stainless Steel 304 Resilient Seat Gate Valve Characteristic : Medium: Water, Waste Water, Air, Oil Temperature: -20 to 120℃ More information please click here