Tianjin KXC Metal Products Co., Ltd.

Valves are used to control the flow of liquids and gases.   Ball valves,    globe  valves   and   gate  valves   are used to control the flow of liquids. These various types of valves are used to create waterways, so it is important to understand these   differences   and their uses. As a   valves supplier , I'd like to introduce them to you. Introduction to Ball Valve Flange Motorized V Type Ball Valve The ball valve made of solid components has high durability and can function perfectly even after being idle for a long time. It has a sphere made of brass, stainless steel or chrome-plated brass embedded in the catheter. The top of the sphere is a lever, which can only be shaken a quarter of a turn. When the horizontal plane is parallel to the pipe, the sphere allows water to flow. When the lever is perpendicular to the pipe, the solid ball stops the water flow. The water flow is controlled by moving the joystick from the angle of t...

Electric Butterfly Valves   are widely used in many areas of our daily life. Do you understand the related uses and advantages of electric butterfly valves? I believe many people don't know so well. Please follow the editor of electric butterfly valves to understand. Electric butterfly valve belongs to a variety of electric valve and electric regulating valve. Electric butterfly valve connection methods mainly include: flange type and wafer type; electric butterfly valve sealing forms mainly include: rubber seal and metal seal. The electric butterfly valve controls the switch of the butterfly valve through the power signal. The product can be used as a shut-off valve, control valve and check valve for piping systems. With manual control device, once there is a power failure, it can be temporarily operated manually without affecting the use. Electric butterfly valves are suitable for occasions that require flow adjustment. Since the pressure loss of the butterfly valve in the pipeli...

Gate valves are classified according to the type of stem, which can be divided into two types: open stem gate valve and Non-rising stem gate valve. The two are different in transmission mode, valve body structure, installation space, application range, etc. Non-Rising Stem Gate Valve Rising Stem Gate Valve 1. The difference in transmission mode. The transmission mode of the Rising stem gate valve is that the handwheel drives the nut to rotate in place, and the valve stem is linearly raised and lowered. Through the threaded transmission of the valve stem and the steering wheel, the valve disc rises and falls to complete the switch; the Non-rising stem gate valve is a hand The wheel drives the valve stem to rotate. The hand wheel and the valve stem are connected together and relatively immovable. There are threads in the gate, and the valve stem rotates at a fixed point to drive the gate to rise and fall. 2. The difference in structure, the structure of the rising stem gate valve is tha...